NBA Bubble @ ESPN Wide World of Sports-Released

hi. i've follow the installation instructions from the previous page but it only shows like this. how do I fix this?
[ Image ]

re check make sure its 160 160 s160 f160. You missed something .

rechecked and still none. it actually goes back to default amway center values after saving the roster.

do you have hook tool installed ???

oops haven't yet. how do you use it for the mod?

Followed the instructions but everything went gray.
https://freeimage.host/i/1.dk3Rig

ok do you have hook tool installed based on the "gray" that is what it looks like. here is the link
viewtopic.php?f=258&t=108024

Everythings working now except for the dornas

PLease help. Eveyrthing works fine for me except for Dornas. Ive tried reoving all mods nd tools already. BUt still dornas dnt appear. Its just all black. Hope you can help. Thanksss.

For those who still do not work the dornas despite having done everything right, try this, I think it has to do with the location of their servers in the world, until I put 160_eu.iff in the dornas folder, no It worked for me because I am from Spain and the servers in Europe belong to me, you just have to drag the dornas folder that is inside the rar to the waigua folder. I hope it works for you and you can enjoy like me this impressive mod thanks to Hokupguy
http://www.mediafire.com/file/egkqz68sv ... x.rar/file

Finally got it to work. Thank you.

hokupguy, testing the mod:

phpBB [video]

looks good , my biggest question is what did you have to the stands side to get the cam to work ?

i just did what u said in edit mode. also, i didn't do a hard move. meaning, i didn't try to move it all the way. just move it enough so it's not in the way and hidden at the same time.

hi. i've follow the installation instructions from the previous page but it only shows like this. how do I fix this?
[ Image ]

re check make sure its 160 160 s160 f160. You missed something .

rechecked and still none. it actually goes back to default amway center values after saving the roster.

do you have hook tool installed ???

oops haven't yet. how do you use it for the mod?

You just need to have it setup on working on ur pc.

Then everything u do in nba2ktool will work and show up in game.

Followed the instructions but everything went gray.
https://freeimage.host/i/1.dk3Rig

ok do you have hook tool installed based on the "gray" that is what it looks like. here is the link
viewtopic.php?f=258&t=108024

Everythings working now except for the dornas

PLease help. Eveyrthing works fine for me except for Dornas. Ive tried reoving all mods nd tools already. BUt still dornas dnt appear. Its just all black. Hope you can help. Thanksss.

For those who still do not work the dornas despite having done everything right, try this, I think it has to do with the location of their servers in the world, until I put 160_eu.iff in the dornas folder, no It worked for me because I am from Spain and the servers in Europe belong to me, you just have to drag the dornas folder that is inside the rar to the waigua folder. I hope it works for you and you can enjoy like me this impressive mod thanks to Hokupguy
http://www.mediafire.com/file/egkqz68sv ... x.rar/file

Finally got it to work. Thank you.

That's great enjoy

My Bubble in Action. Video Courtesy of - BJEFF

phpBB [video]

My Bubble in Action. Video Courtesy of - BJEFF

phpBB [video]

Is this using Manni's courts? I would love to have the team specific floors in my bubble games.

Hey guys, newbie in PC games here, just moved from PS4. I'm struggling to make the mod work, can somebody help me? This is the 1st mod I ever tried to install in my PC, I watched the tutorial video by goods ( Harden face) and followed ther instructions in the file too, but it doesn't show up in my game, what do I need to do? Sorry for bother with some ignorant quations but I'm completely new to this stuff and can't wait to play with those awesome mods. thanks!

My Bubble in Action. Video Courtesy of - BJEFF

phpBB [video]

Is this using Manni's courts? I would love to have the team specific floors in my bubble games.

No Manni , has not released his 16 playoffs team courts.

Hey guys, newbie in PC games here, just moved from PS4. I'm struggling to make the mod work, can somebody help me? This is the 1st mod I ever tried to install in my PC, I watched the tutorial video by goods ( Harden face) and followed ther instructions in the file too, but it doesn't show up in my game, what do I need to do? Sorry for bother with some ignorant quations but I'm completely new to this stuff and can't wait to play with those awesome mods. thanks!

Welcome , in future read through thread backward you find your answer usually .

You 1st need to get the hook tool link here : viewtopic.php?f=258&t=108024 .if you have any questions about look through that thread
2nd you need NBA 2ktool link here: viewtopic.php?f=258&t=110006
here is a how to video and follow the pic setup in have in the file.
Video courtesy of TgSoGood

phpBB [video]

you should be good to go.

Can someone help me? I followed all the steps that are mentioned but my game crashes while in loading screen

same scenario sir.does it crashes at 41% loading?

Can someone help me? I followed all the steps that are mentioned but my game crashes while in loading screen

same scenario sir.does it crashes at 41% loading?

If you have the hook config from natkra90 delete it, that fixed mine

Thanks, I really aprecciate!

I've been able to install some mods, but still struggling to use hook and put the scoreboards and watermarks in. I couldn't find any tutorials about how to do that. The only one that I found didn't work.

Also, I don't even know how to launch nba 2k tool when in game, I have no idea. completely new to the PC world and it's been really difficult. sorry for the dumb questions, but I need some help. Thanks

So bright and shiny!
Amazing work man!!!

phpBB [video]

Can someone help me? I followed all the steps that are mentioned but my game crashes while in loading screen

same scenario sir.does it crashes at 41% loading?

If you have the hook config from natkra90 delete it, that fixed mine

after deleting the hook config from natkra90 it turn gray and back to normal court

Amazing stadium, i have a question, is there anyway to merge the Team LED walls from Natrka90s bubble with this one...that would be the perfect mix

Cause as it stands the floor is done by Rtomb_03 and you have created the Social distancing atmosphere, just missing the team LEDs from natkra

Amazing stadium, i have a question, is there anyway to merge the Team LED walls from Natrka90s bubble with this one...that would be the perfect mix

Cause as it stands the floor is done by Rtomb_03 and you have created the Social distancing atmosphere, just missing the team LEDs from natkra

no they wont.

i am trying to edit the animations. Plus the great walls natkra made art for are no longer being used in games sadley.

Can someone help me? I followed all the steps that are mentioned but my game crashes while in loading screen

same scenario sir.does it crashes at 41% loading?

If you have the hook config from natkra90 delete it, that fixed mine

after deleting the hook config from natkra90 it turn gray and back to normal court

ok go and check your work in nba 2k tool make sure you set it up right ? when its gray it means you either don't have hook , which you do since you had the other mod. Or you type in the wrong arena id.

So bright and shiny!
Amazing work man!!!

phpBB [video]

nice !!! Keep sharing .

Thanks, I really aprecciate!

I've been able to install some mods, but still struggling to use hook and put the scoreboards and watermarks in. I couldn't find any tutorials about how to do that. The only one that I found didn't work.

Also, I don't even know how to launch nba 2k tool when in game, I have no idea. completely new to the PC world and it's been really difficult. sorry for the dumb questions, but I need some help. Thanks

your going to have look at each mod and tool thread for those answers but you should find them in there. Welcome to pc.

Can someone help me? I followed all the steps that are mentioned but my game crashes while in loading screen

same scenario sir.does it crashes at 41% loading?

If you have the hook config from natkra90 delete it, that fixed mine

You do not have the required permissions to view the files attached to this post.

Can someone help me? I followed all the steps that are mentioned but my game crashes while in loading screen

same scenario sir.does it crashes at 41% loading?

If you have the hook config from natkra90 delete it, that fixed mine

after deleting the hook config from natkra90 it turn gray and back to normal court

ok go and check your work in nba 2k tool make sure you set it up right ? when its gray it means you either don't have hook , which you do since you had the other mod. Or you type in the wrong arena id.

You do not have the required permissions to view the files attached to this post.

how exactly do i set this up in nba 2ktools? i dont see how to get to the stadium editor

========================================================
It took me a while to figure it out, since not everything is mentioned.
========================================================
1.) First you need to launch your game ("NBA2KTOOL" won't work if your game is not running)

2.) Once you are at the main menu of the game, go into (Features) tab and then (Create Roster) tab and select (User-Created Roster) select your Roster you plan to use.
- (You can create one beforehand and name it Bubble) -

3) Once you have selected your Roster and it loads into the editor in-game... press and hold down (ALT) key on keyboard and then hit (TAB) key while holding (ALT) key.
This allows you to open background opened windows. Or you can just hit the (Windows Key) and then launch "NBA2KTOOL".

4) At the main menu of "NBA2KTOOL" you should see a menu on the left, click on (TEAMS) and then choose "Orlando Magic" or at the top search bar type in 16 and below pick "Orlando Magic".

5) Once you click once on the team, the right side window should now show "Orlando Magic" in large, click on (Edit Team) button.

6) Now find the field ( Stadium[*] ) and on the right of it click (Edit) button.

7) At this point you can follow the (Set up in Looh NBA2k Tool.png) that was included in the download file to edit the fields.

8) Once you edit the field accordingly click on the [x] for that edit window to close and then, choose the teams you plan on using or playing with in "NBA2kTOOL" and again go to the
( Stadium[*] ) field but this time only drop the menu down... and simply find the "Amway Center" and choose it. once your done leave "NBA2KTOOL" running in the background and
switch back to the game running with (ALT + TAB).

9) You should still be in the Edit Roster mode with the Roster that you selected to load... Now simply exit out and save it. You can now exit out of "NBA2KTOOL" and play your game.

===========================================================================================================
NOTE: I have not tried using "Memorial Colsium" instead of "Amway Center", yet. I quess it is suppose to work better with that stadium, but i had no issues with "Amway Center".

sir do i have load the save Bubble roster youre saying everytime? On my case, loading that roster crashes my game

how exactly do i set this up in nba 2ktools? i dont see how to get to the stadium editor

========================================================
It took me a while to figure it out, since not everything is mentioned.
========================================================
1.) First you need to launch your game ("NBA2KTOOL" won't work if your game is not running)

2.) Once you are at the main menu of the game, go into (Features) tab and then (Create Roster) tab and select (User-Created Roster) select your Roster you plan to use.
- (You can create one beforehand and name it Bubble) -

3) Once you have selected your Roster and it loads into the editor in-game... press and hold down (ALT) key on keyboard and then hit (TAB) key while holding (ALT) key.
This allows you to open background opened windows. Or you can just hit the (Windows Key) and then launch "NBA2KTOOL".

4) At the main menu of "NBA2KTOOL" you should see a menu on the left, click on (TEAMS) and then choose "Orlando Magic" or at the top search bar type in 16 and below pick "Orlando Magic".

5) Once you click once on the team, the right side window should now show "Orlando Magic" in large, click on (Edit Team) button.

6) Now find the field ( Stadium[*] ) and on the right of it click (Edit) button.

7) At this point you can follow the (Set up in Looh NBA2k Tool.png) that was included in the download file to edit the fields.

8) Once you edit the field accordingly click on the [x] for that edit window to close and then, choose the teams you plan on using or playing with in "NBA2kTOOL" and again go to the
( Stadium[*] ) field but this time only drop the menu down... and simply find the "Amway Center" and choose it. once your done leave "NBA2KTOOL" running in the background and
switch back to the game running with (ALT + TAB).

9) You should still be in the Edit Roster mode with the Roster that you selected to load... Now simply exit out and save it. You can now exit out of "NBA2KTOOL" and play your game.

===========================================================================================================
NOTE: I have not tried using "Memorial Colsium" instead of "Amway Center", yet. I quess it is suppose to work better with that stadium, but i had no issues with "Amway Center".

sir do i have load the save Bubble roster youre saying everytime? On my case, loading that roster crashes my game

yes you have to load the roster every time, if roster is crashing, make a new one or find a new one. something's not right with the roster save. Regarding the pic of setup in nba 2ktool is correct.

some people have posted a roster that has may bubble setup for them. You can look to download off 2k share and see if that works for you as test. if it still doesn't work for i don't know what to tell you.

Here is one of the roster people are using. Good luck.

Hello,

I don't know what i'm doing wrong. I followed all the instructions but when i start a game, all the players look like shadows and there is no court,everything is gray. Am I the only one having this problem? This is the best looking bubble mod so I would love to play with it.