NBA 2K13 Cheat Tables

Do you have Cheat Engine downloaded and installed?

yes

While running 2k13 hit the select a process button under File and find NBA2k13.exe
Then next to it hit the folder button and find the NBA2k13.CT that you downloaded it should bring up all the addresses and whatnot
While playing in my player go back to cheat engine and go down to SP and hit enter and put whatever amount you like

Let me know if that helped

Ok I'm going to go try it right now thank you

While running 2k13 hit the select a process button under File and find NBA2k13.exe
Then next to it hit the folder button and find the NBA2k13.CT that you downloaded it should bring up all the addresses and whatnot
While playing in my player go down to SP and hit enter and put whatever amount you like

Let me know if that helped

01FF7344 is the SP/VC address

Ok just remember to go back to cheat engine while you're playing MP and go to SP

It worked thank you so much. Just one more question. Do I need to leave the cheat engine running at all times or can I close it now?

While running 2k13 hit the select a process button under File and find NBA2k13.exe
Then next to it hit the folder button and find the NBA2k13.CT that you downloaded it should bring up all the addresses and whatnot
While playing in my player go back to cheat engine and go down to SP and hit enter and put whatever amount you like

Let me know if that helped

If it's only the SP you did and not the sliders then sure 'cause MP autosaves but if you edited the sliders then leave running

Ok thanks again

If it's only the SP you did and not the sliders then sure 'cause MP autosaves but if you edited the sliders then leave running

Where do I download the actual cheat engine?

http://www.cheatengine.org

wooooooahhhhhhh..

confusing.

Thank you for the great info again

money part is pretty easy to find for oneself, but being able to adjust sliders in career mode is a godsend.
and for ppl just finding out about cheat engine, it's a great lil program to use in all games.
I especially love the "speed hack" part. Now I can fast foward some boring slow parts like free throws etc.

btw, if someone finds how to change positions i'd greatly appreciate it.

I'm playing 6'3 PG/sg drafted by Philly, and I don't mind when they playing as a SG half the time, but when they put me in at SF and i'm guarding 6'8+ guys like Durant, it gets a lil annoying.

btw, if someone finds how to change positions i'd greatly appreciate it.

I'm playing 6'3 PG/sg drafted by Philly, and I don't mind when they playing as a SG half the time, but when they put me in at SF and i'm guarding 6'8+ guys like Durant, it gets a lil annoying.

So, what exactly do you want? Do you want to change your position to PG only? Here's the address to change positions:

Address: 015172C5 (OR nba2k13.exe+11172C5) (Int 1 Byte)

Values
PG = 168
PG/SG = 136
SG = 169
SG/PG = 129
SG/SF = 145
SF = 170
SF/SG = 138
SF/PF = 154
PF = 171
PF/SF = 147
PF/C = 163
C = 172
C/PF = 156

And the Draft Pick address would probably require someone far more advanced in hex editing than me, I'm sure it is one of those types that constantly changes. Those are addresses with "pointers" on them and are very hard to control.

Address: 01FF71EC (or nba2k13.exe+1BF71EC) (4 Bytes)

Value - Draft Pick #
0 - 1
1 - 2
2 - 3
3 - 4


..and so on. One thing to remember:

- Make sure you freeze the address with the value of your liking before entering the MyCareer mode, before the draft has taken place. I tried this method several times and it seems to be working.

i rty to drafted lakers and because they are 60 pick i do the 59 value and it dosent work me!

So, what exactly do you want? Do you want to change your position to PG only? Here's the address to change positions:

Address: 015172C5 (OR nba2k13.exe+11172C5) (Int 1 Byte)

yes, exactly. hoping that helps.
a few times, me as a pg was playing at PF?!? lol
hoping it's not some sorta bug.

Thank you very much

i rty to drafted lakers and because they are 60 pick i do the 59 value and it dosent work me!

Just like with NBA 2k12, the 'hack' only seems to be working up until the 30th pick. I don't think it's possible for anyone to get drafted in the second round.

So, what exactly do you want? Do you want to change your position to PG only? Here's the address to change positions:

Address: 015172C5 (OR nba2k13.exe+11172C5) (Int 1 Byte)

How exactly i can change position? I added this address, type : byte. What next? I freeze it - nothing. Set the value to 1 - still don't work.

So, what exactly do you want? Do you want to change your position to PG only? Here's the address to change positions:

Address: 015172C5 (OR nba2k13.exe+11172C5) (Int 1 Byte)

How exactly i can change position? I added this address, type : byte. What next? I freeze it - nothing. Set the value to 1 - still don't work.

1) Edit player in NBA 2k13.
2) Change value of address in CE and freeze address.
3) Apply changes in NBA 2k13 and make sure to save your MyCareer file.

And the Draft Pick address would probably require someone far more advanced in hex editing than me, I'm sure it is one of those types that constantly changes. Those are addresses with "pointers" on them and are very hard to control.

Address: 01FF71EC (or nba2k13.exe+1BF71EC) (4 Bytes)

Value - Draft Pick #
0 - 1
1 - 2
2 - 3
3 - 4


..and so on. One thing to remember:

- Make sure you freeze the address with the value of your liking before entering the MyCareer mode, before the draft has taken place. I tried this method several times and it seems to be working.

I'm somewhat confused...

is this how its supposed to be done? edit me if i did something wrong!

1. open up game w/ cheat engine
2. add address manually ( 01FF71EC)
3. right click it -> change value -> lets say i wanted to get drafted by raptors with there 8th pick.. I would type in 9 in value?

I should have all this done before i start up mycareer ?
and finally, how do i freeze it?

EDIT: oh geez.. where are my manners..

Thanks in advice

is this how its supposed to be done? edit me if i did something wrong!

1. open up game w/ cheat engine
2. add address manually ( 01FF71EC)
3. right click it -> change value -> lets say i wanted to get drafted by raptors with there 8th pick.. I would type in 9 in value?

I should have all this done before i start up mycareer ?
and finally, how do i freeze it?

EDIT: oh geez.. where are my manners..

Thanks in advice

1) Open up game with Cheat Engine ---> Correct
2) Add address manually ---> Correct
3) If you want to get drafted by the Raptors with their 8th pick, you have to enter 7 in CE. If you'd like to get drafted by the New Orleans Hornets at 1, you have to enter 0 as your value. If you'd like to be selected as the 30th pick in the draft, you fill in 29 as your value.

Just to be on the safe side, you need to enter and freeze the value before entering MyCareer mode. You freeze the address by simply ticking the box (under the "Active" Column in CE).

Got it?

Thank you for your efforts as well, Bruce.

I don't mind it at all, I'm just glad I am able to contribute to the NLSC community. Here are some more addresses:

Height - 0151729C (Float) in Centimeters.
Weight - 015172A0 (Float) in Pounds.

In case some of you would like to adjust attributes in My Career Mode (or any other mode), below you'll find addresses of some attributes. Attributes (X-25) * 3 ---> that's how values are calculated --> 99 attribute is (99-25)*3= 222 in memory. Here are some addresses:

Block: 01517402 (byte)
Shoot in Traffic: 015173FA (byte)
Offensive Rebound: 01517409 (byte)
Defensive Rebound: 0151740A (byte)
Potential: 01517411 (byte)
Strength: 01517412 (byte)
Standing Dunk: 015173F9 (byte)
Three Point Shot: 015173F4 (byte)
Post Hook: 01517414 (byte)
Post Fadeaway: 01517413 (byte)
Low Post Offense: 01517401 (byte)
Low Post Defense: 01517400 (byte)

Enjoy!

Doesn't work for me:/.

Doesn't work for me:/.

Download the CE table released by Bruce, you'll find all the updated and working attributes in there.

is this how its supposed to be done? edit me if i did something wrong!

1. open up game w/ cheat engine
2. add address manually ( 01FF71EC)
3. right click it -> change value -> lets say i wanted to get drafted by raptors with there 8th pick.. I would type in 9 in value?

I should have all this done before i start up mycareer ?
and finally, how do i freeze it?

EDIT: oh geez.. where are my manners..

Thanks in advice

1) Open up game with Cheat Engine ---> Correct
2) Add address manually ---> Correct
3) If you want to get drafted by the Raptors with their 8th pick, you have to enter 7 in CE. If you'd like to get drafted by the New Orleans Hornets at 1, you have to enter 0 as your value. If you'd like to be selected as the 30th pick in the draft, you fill in 29 as your value.

Just to be on the safe side, you need to enter and freeze the value before entering MyCareer mode. You freeze the address by simply ticking the box (under the "Active" Column in CE).

Got it?

ill try this wen i get home from school.

ill update u soon enough

thx

i rty to drafted lakers and because they are 60 pick i do the 59 value and it dosent work me!

Just like with NBA 2k12, the 'hack' only seems to be working up until the 30th pick. I don't think it's possible for anyone to get drafted in the second round.

I was able to be drafted by the Hawks over and over in 2k12, and they were picking in the second round. Froze the value before starting MyPlayer, the screen went black during the draft and after 5 minutes or so I was drafted by the Hawks in the second round.

Has anyone been able to find the Trades value yet? Would love to turn this off because some of the trades I'm seeing...