[Chinese] Fantasy Star Trainer by Aleczou(updated to v1.3)

[Loveternity]

All of a sudden the strangest thing happened. The trainer was working fine until all of a sudden, today to be exact, it doesn't work anymore, showing 0 and -1 everywhere. Didn't update official roster, deleted everything apart from Saves folder in appdata\roaming\nba2k14 etc., run trainer as administrator, turned off internet connection, restart game and restart trainer. Strange, it's been working previously. Anyone else experiencing that?

you must reinstall nba 2k14 game if you want the trainer works again.

Thank you for the suggestion, but unfortunately it didn't help.

I've tried everything I could think of. Reinstalled, deleted everything in the Roaming folder after backing up my saves, still nothing. =/

[npetroo]

Guys,
I never have any problems with this trainer. Not a single problem!
About 5 minutes ago, I installed latest roster update, but I downloaded that update (.ros file, online data…) from thread on this forum – NOT 2K SERVER! Trainer works fine.

First post in this thread – you need to make sure you are not connected to 2K servers.
The only sure way of doing that is disconnecting from internet or blocking NBA 2K exe with a firewall (or both preferably). When you are finished editing, go back online. That’s it.

[Loveternity]

Guys,
I never have any problems with this trainer. Not a single problem!
About 5 minutes ago, I installed latest roster update, but I downloaded that update (.ros file, online data…) from thread on this forum – NOT 2K SERVER! Trainer works fine.

First post in this thread – you need to make sure you are not connected to 2K servers.
The only sure way of doing that is disconnecting from internet or blocking NBA 2K exe with a firewall (or both preferably). When you are finished editing, go back online. That’s it.

I have no doubt that the trainer can work fine. It used to work perfectly for me as well.

However, I have searched all pages of this thread (yes, I've read EVERYTHING) and a large part of what I want to do with the trainer cannot be done anymore.

I have never connected to the 2k servers. I haven't updated or modified a single thing for my game. My firewall has it blocked for good measure too.

I have tried every single solution suggested in this thread, yet my Career and Settings tab still won't work.

What I'm trying to say here is that the trainer can (seemingly randomly, even though I don't believe in "luck") stop working properly for people even if they follow all instructions to the letter.

I sincerely hope that someone can figure out what is going on. I've run out of ideas for now. =(

[XpLosibo]

Someone already found a solution for hidden players?

use the search box (upper left) for the hidden player, then just click yes to the "Is Free Agent box" or edit the team1/team2 if you want to assign him to a specific team, and change the "player type" to currently active.

My team only or it also applies to all the other teams as well? I've tried it and nothing seems to be happening so far. Appreciate your reply, though!

yes hard cap & salary cap is for all the teams, the team salary is for your team only. it automatically saves, i dont know why nothing is happening for you.

I've been trying to make some players begin the association already injured.
I can make them be injured on my roster file and then i save it, but when i start my association they are not injured any more.
Any suggestions?

start your association. open the trainer. injure them all.

[Loveternity]

What the hell, it's working again. o_o

Here's what I did... I loaded my Association to check if it worked, it still didn't. I closed the trainer, played a game, saved, then minimized to open the trainer again. And voila, the Settings tab showed proper values!

Loaded my Career to double check, everything's fine now.

What is this sorcery? It can't be random.

[VengefulVeteran]

Someone already found a solution for hidden players?

use the search box (upper left) for the hidden player, then just click yes to the "Is Free Agent box" or edit the team1/team2 if you want to assign him to a specific team, and change the "player type" to currently active.

My team only or it also applies to all the other teams as well? I've tried it and nothing seems to be happening so far. Appreciate your reply, though!

yes hard cap & salary cap is for all the teams, the team salary is for your team only. it automatically saves, i dont know why nothing is happening for you.

I've been trying to make some players begin the association already injured.
I can make them be injured on my roster file and then i save it, but when i start my association they are not injured any more.
Any suggestions?

start your association. open the trainer. injure them all.

My apologies. The Hard Cap and the Salary Cap works but not the Team Salary. I will try a different team to see how it goes. I was using the bulls and it was -22 million and changed the Team Salary and nothing changes. Not sure if it's supposed to (I'm new to the Association Mode, so it's I'm kinda blur). Was I supposed to see changes right away? By the way, is there a way to change the team budget? Appreciate the help you've given me, my man.

[XpLosibo]

Is it possible to edit the team's salary and budget in the Association mode using this Trainer?

yes it is. just don't edit the "team salary", it could have an effect & mess up the players' contracts

like i said here, don't edit the team salary.. if you want to change the team budget, you can adjust the player's salary in-game, in the edit player screen, the team budget will be automatically recalculated.

[tim_tone]

Tbh tim_tone, just like 5 hours later after i posted this, the trainer never worked for me again!
I don't know why! First i did not even have to delete the online folder or had to clear the cache...
And now the trainer resets always everything or just my changes didn't show up ingame...

And i just need this trainer for the "player role" and "minutes in the rotation"....

that's a shame dude, hope everythings already working properly

Someone already found a solution for hidden players?

use the search box (upper left) for the hidden player, then just click yes to the "Is Free Agent box" or edit the team1/team2 if you want to assign him to a specific team, and change the "player type" to currently active.

THANK YOU XpLosibo!

Finally I got it

[mrla119]

Is there a way to turn injuries back on in MyCareer? I know there's an option for it under the "gameplay" menu but everytime I change it, the game would start with 0.4 secs before halftime.

[Rockness]

Tbh tim_tone, just like 5 hours later after i posted this, the trainer never worked for me again!
I don't know why! First i did not even have to delete the online folder or had to clear the cache...
And now the trainer resets always everything or just my changes didn't show up ingame...

And i just need this trainer for the "player role" and "minutes in the rotation"....

that's a shame dude, hope everythings already working properly

Its far from working properly but i would say at least now i thing, i know what could cause these Problems.
I guess it have something to do with the Autosave!
Here are my steps

1. Load myCareer
2. Load Trainer
3. (!) Not working for me...Assign the Player Role(This resets all the time or just switches to 6th Man Role)
4. Assign the Minutes(in Player info Tab & MC + lock up)
5. Turn off via Trainer the Autosave
6. Save myCareer
7. Play a game
8. Save after the game
And here comes the Problem...
9. Close Trainer
10. Play another one and witness how your Minutes and Role are getting reduced just before it loads the game!
11. AUTOSAVE is also active again after i close the Trainer!

and since today i have a new Problem too!

12. Game just starts with 0.9 Seconds left in the 1st half!

[zkritt]

All of a sudden the strangest thing happened. The trainer was working fine until all of a sudden, today to be exact, it doesn't work anymore, showing 0 and -1 everywhere. Didn't update official roster, deleted everything apart of Saves folder in appdata\roaming\nba2k14 etc., run trainer as administrator, turned off internet connection, restart game and restart trainer. Strange. It's been working previously. Anyone else experiencing that?

Yes it's happening for me all the time. Seems to always go back to working a couple hours later at random. No idea what the deal is or what's causing it.

Happens to me too - works like a charm most of the time, but once in a while it doesn't.
I think it wants you to do the dishes or something instead of spending time on the computer...

is anyone here can help us fix that kind of problem?? that happens in my game too..

For everyone with this problem - I may have found a solution to the problem!

Set the date in windows to sometime in october, (I set mine to october 29), BEFORE you start the game and the trainer...

Works for me now!

[VengefulVeteran]

Is it possible to edit the team's salary and budget in the Association mode using this Trainer?

yes it is. just don't edit the "team salary", it could have an effect & mess up the players' contracts

like i said here, don't edit the team salary.. if you want to change the team budget, you can adjust the player's salary in-game, in the edit player screen, the team budget will be automatically recalculated.

Oh well, better than nothing I suppose. Thanks a lot!

[SeattleSonics]

are you able to do Draft classes wit this?

[Loveternity]

For everyone with this problem - I may have found a solution to the problem!

Set the date in windows to sometime in october, (I set mine to october 29), BEFORE you start the game and the trainer...

Works for me now!

"Unfortunately" my trainer is working fine at the moment, so I cannot test this for myself.

But it makes sense. I've had this trainer since 1.2 was released and only recently did it start bugging out.

Something to do with the option to start associations and stuff in real time perhaps?

Anyway, thank you, at least now there is a possible explanation to all the "randomness"!

[Loveternity]

Is there a way to turn injuries back on in MyCareer? I know there's an option for it under the "gameplay" menu but everytime I change it, the game would start with 0.4 secs before halftime.

I don't have that clock issue, but changing the setting doesn't seem to affect the bug unfortunately.

I got the bug during the All-Star weekend of my second season and tried turning injuries off, saved, turned them back on, saved again. After playing a couple of games, I still see nobody on the injury list. =/

I could force an injury on some player just to see if that is going to change anything. Gonna try that now, who knows.

Edit: Interesting... The player I injured for a month was cured as soon as the next game I played ended. So whatever the bug is, it constantly clears all injuries from all players. Doesn't seem like there is a way to fix it.

[siggi]

All of a sudden the strangest thing happened. The trainer was working fine until all of a sudden, today to be exact, it doesn't work anymore, showing 0 and -1 everywhere. Didn't update official roster, deleted everything apart of Saves folder in appdata\roaming\nba2k14 etc., run trainer as administrator, turned off internet connection, restart game and restart trainer. Strange. It's been working previously. Anyone else experiencing that?

Yes it's happening for me all the time. Seems to always go back to working a couple hours later at random. No idea what the deal is or what's causing it.

Happens to me too - works like a charm most of the time, but once in a while it doesn't.
I think it wants you to do the dishes or something instead of spending time on the computer...

is anyone here can help us fix that kind of problem?? that happens in my game too..

For everyone with this problem - I may have found a solution to the problem!

Set the date in windows to sometime in october, (I set mine to october 29), BEFORE you start the game and the trainer...

Works for me now!

yes, it 's the best solution . thank you very much.

[wuttang]

yeah, the trainer was working for me for a couple days, stopped working, then started working again few days later. weirdest thing lol

anyways,
How are you guys managing your team's rotation minutes? Changing MY minutes has been easy, but from what I can gather, no real way to change teammate's minutes.
Tried editing contracts of AI players, (from ROLE to BENCH etc.), but they didn't seem to stick.
brought in some FAs but can't get the minutes like I want.
for some reason the team AI gives more minutes to lesser players as well sometimes
ex. Matt Barnes (67) over Mbah Moute (71), both have BENCH contracts.
Kris Humphries over Asik.

though unlikely, Anyone know of a fix?
if not, anyone know the logic behind's the AI's team rotation selection method?

btw, just a personal wish, it'd be great if we could move draft picks. a man can hope

Have nice day.

[tim_tone]

Anybody knows what should I edit to make a veteran player like Rasheed Wallace stop being presented as "rookie"/"first NBA official game" by the announcer?

[Goosey54]

anyone managed to change season length?

[BARTMAN]

[kalionyo]

After trying to get this program to run, I have only been successfully able to run it on Windows 8. I'm still having problems on Windows 7 x64bit though which is strange. I only have Windows 8 as a dual-boot option so I prefer not to reinstall the game on the OS. Any suggestions on getting this to run on Windows 7, specifically "failed allocate xxxxxx bytes of memory." Thanks

[Juillani]

Hey guys, I created a My Career and used the trainer to get Michael Jordan cyberface, I play for the Bulls #23, everything is fine except for my career stats are not saving, any clues on how to fix this error. Please comment and leave a response

[zheng1992410]

What a pity that Aleczou will not update this tainer this year~

[BARTMAN]

[dplasmawalk]

how can i use this on my mycareer? i want to change my body type and other else to something different. i searched for my mycareer's name and then nothing showed up except for andrew bynum and other players that has an andrew on their name. help