WATERMARKS - WHOLE SCREEN watermark

WHOLE SCREEN WATERMARK

Replace the texture with anything you want.
Control transparency with your texture

DOWNLOAD here
http://forums.nba-live.com/downloads.php?view=detail&df_id=6070





************************************
OLD STUFF



How to move and resize Watermark.

File to modify: gooeyoverlaysstatic.iff
Must be decompressed (that is simply to achieve, just open the file with NBA 2KX Mod Tool once at it will be decompressed).

Open file with any Hex Editor.
Find offsets (address) written in the picture.
Modify them to your taste.


Basic rules of moding those offsets
--
TOP LEFT CORNER will be achieved by just raising standard 2K water watermark up through the screen (no need to move left or right)
Use offset painted RED.
Substitute RED 00 80 with b6 43.
If this is too low or high for your monitor, raise or lower just a little.
- Lowering small- if it was b6 43, than lowering could be b5 43 or b4 43, b3 43. b2 43, b1 43, b0 43, cf 43, ce 43, cd 43, cc 43, cb 43, ca 43, c9 43 or c8 43, etc.
You can lower much more if needed, just enter larger gap. if b6 43, you can go a6 43, 96 43, 86 43, 76 43, etc.
- Raising small- - same as lowering, just to opposite side. If b6 43, raise min. b7 43, b8 43, b9 43 or ba 43, etc.
YOu may raise more if enter larger gap - if b6 43, then c6 43 ir more up, d6 43 even more up, et.c

I am pretty sure tou uderstand my logic.
Substitute BLUE 00 80 with b6 43.


After you succesfully moed watermark to Top Left corner, now you try to move to right.
TOP RIGHT CORNER by moving watermark to right.
Use offset painted BLUE 00 80 with 1a 44
Then everything the same as moving up/down.
Tweak it a little bit to left - if 1a 44, then 19 44 or 18 44, 17 44, 16 44, etc.
Move to right side - if 1a 44, then 1b 44, 1c 44, 1d 44, 1e 44, 1f 44, 20 44, 21 44, etc.

********
CHANGE SIZE OF watermaker.
Use GREEN painted offset.
By defayult it [img]de%2041[/img]
Smaller size - if de 41, then ce 41 or be 41, ae, 41, 9e 41, 8e 41, etc. (same logic as moving leftright-updown)
Larger size - if de 41, then de 41 or ee 41, fe 41, 00 42, 10 42, 20 42, etc,

***********
It is always better first to set the size of watermark, then to move it, because after resizing watermark is changing position,


************
How to import different images .
Use NBA 2KX Mod Tool.
in the file Section 25, Subfile 17.

I will not go deeper to explain how to edit textures and prepare them for importing, this is not the idea of topic. There are plenty tutorials in the forum how to edit pictures, how to use NBA 2kX mod tool.


***********

Also you can download form here file with some pre-arranged possition, just substite texture and tweak slightly position.
TOP LEFT CORNER (small, standard, large sizes) - DOWNLOAD

Top Left.rar

TOP RIGHT CORNER (small, standard, large sizes) - DOWNLOAD

Top Right.rar

****

MOST IMPORTANT

A. Ask here if something is still not clear.
B. Please post screenshots of your TV watermark. Not a request, but would be nice if you could also share with your moddified file for visitor to choose and download

Good luck with modding

You do not have the required permissions to view the files attached to this post.

Last edited by exrxixxx on Tue Nov 26, 2013 9:25 pm, edited 7 times in total.

Hm. I do not know what to write there, I am not very interested in watermarks, but if there are people who love such things I would be happy to share KNOW-HOW (moving&resizing) or/and release some TV watermarks.

Post your requests here.

im interested bro, can you post a tutorial...

nba tv like 2K11 mod ?

I ask this stuff before, can u do ABC network? If possible at top right screen. Great find.

but move it a little to left

I will post tutorial later.
There are monitors with different aspect ration.
Watermark for 16:10 will be placed differently than for monitors 16:9, etc.
Different lenght and width

amazing how you figure that out! i'll be very happy once you post those tuts

amazing how you figure that out! i'll be very happy once you post those tuts

Bearing in mind how much time I spent with scoreboards, that one was nothing.
Will write tutorial as soon as finish import larger textures to stadium files - very interesting (new thing for me). So far so good

Is that a Player Indicator Name Watermark? I want that.

Can we also move scoreboards with this method?

WoW, finally someone found how to put watermark on top of the screen I was waiting for this...Good work mate!

Is that a Player Indicator Name Watermark? I want that.

Can we also move scoreboards with this method?

1) Watermark is "NBA2k14" semi transparent logo.
BY default it is in left bottom corner.

2) No, you can't move scoreboards so simply (at least yet).

I was talking about this.

1) Watermark is "NBA2k14" semi transparent logo.
BY default it is in left bottom corner.

Is it possible to make two 1 from the left and 1 from the right?

How to move and resize Watermark.

File to modify: gooeyoverlaysstatic.iff
Must be decompressed (that is simply to achieve, just open the file with NBA 2KX Mod Tool once at it will be decompressed).

Open file with any Hex Editor.
Find offsets (address) written in the picture.
Modify them to your taste.


Basic rules of moding those offsets
--
TOP LEFT CORNER will be achieved by just raising standard 2K water watermark up through the screen (no need to move left or right)
Use offset painted RED.
Substitute RED 00 80 with b6 43.
If this is too low or high for your monitor, raise or lower just a little.
- Lowering small- if it was b6 43, than lowering could be b5 43 or b4 43, b3 43. b2 43, b1 43, b0 43, cf 43, ce 43, cd 43, cc 43, cb 43, ca 43, c9 43 or c8 43, etc.
You can lower much more if needed, just enter larger gap. if b6 43, you can go a6 43, 96 43, 86 43, 76 43, etc.
- Raising small- - same as lowering, just to opposite side. If b6 43, raise min. b7 43, b8 43, b9 43 or ba 43, etc.
YOu may raise more if enter larger gap - if b6 43, then c6 43 ir more up, d6 43 even more up, et.c

I am pretty sure tou uderstand my logic.
Substitute BLUE 00 80 with b6 43.


After you succesfully moed watermark to Top Left corner, now you try to move to right.
TOP RIGHT CORNER by moving watermark to right.
Use offset painted BLUE 00 80 with 1a 44
Then everything the same as moving up/down.
Tweak it a little bit to left - if 1a 44, then 19 44 or 18 44, 17 44, 16 44, etc.
Move to right side - if 1a 44, then 1b 44, 1c 44, 1d 44, 1e 44, 1f 44, 20 44, 21 44, etc.

********
CHANGE SIZE OF watermaker.
Use GREEN painted offset.
By defayult it [img]de%2041[/img]
Smaller size - if de 41, then ce 41 or be 41, ae, 41, 9e 41, 8e 41, etc. (same logic as moving leftright-updown)
Larger size - if de 41, then de 41 or ee 41, fe 41, 00 42, 10 42, 20 42, etc,

***********
It is always better first to set the size of watermark, then to move it, because after resizing watermark is changing position,


************
How to import different images .
Use NBA 2KX Mod Tool.
in the file Section 25, Subfile 17.

I will not go deeper to explain how to edit textures and prepare them for importing, this is not the idea of topic. There are plenty tutorials in the forum how to edit pictures, how to use NBA 2kX mod tool.


***********

Also you can download form here file with some pre-arranged possition, just substite texture and tweak slightly position.
TOP LEFT CORNER (small, standard, large sizes)
TOP RIGHT CORNER (small, standard, large sizes)
Download in the post of this thread



****

MOST IMPORTANT

A. Ask here if something is still not clear.
B. Please post screenshots of your TV watermark. Not a request, but would be nice if you could also share with your moddified file for visitor to choose and download

Good luck with modding

Last edited by exrxixxx on Sun Oct 27, 2013 9:28 am, edited 1 time in total.

I was talking about this.

It is just fading image I suppose for some reason. Mirage
But I can make such thing if needed

Last edited by exrxixxx on Sun Oct 27, 2013 9:48 am, edited 2 times in total.

1) Watermark is "NBA2k14" semi transparent logo.
BY default it is in left bottom corner.

Is it possible to make two 1 from the left and 1 from the right?

Technically YEs.

Just enlarge texture whole screen size. Then draw 2 small items in corner in same picture.
But this is not serious, will be too pixelated. Image is 128x128 px. not enough for the whole screen with good quality,

Now I hope someone's gonna make Live TNT watermark on top of the right corner

is possible to Eliminate the transparency?

great job, thanks

thanks for this man, now i got it....one more thing bro, can you remove trasparency

Last edited by ruckzell17 on Sun Oct 27, 2013 6:24 pm, edited 1 time in total.

thanks for this man, now i got it....one more thing bro, can you remove trasparency

Glad you successeded.
Regarding transparency ... I will take a look if I am able to find something quickly

thanks for this man, now i got it....one more thing bro, can you remove trasparency

Glad you successeded.
Regarding transparency ... I will take a look if I am able to find something quickly

nice to hear that
and one more thing bro. maybe you can remove the directors cut overlay in instant replay?

I was talking about this.

It is just fading image I suppose for some reason. Mirage
But I can make such thing if needed

Would be cool!

thanks for this man, now i got it....one more thing bro, can you remove trasparency

Glad you successeded.
Regarding transparency ... I will take a look if I am able to find something quickly

nice to hear that
and one more thing bro. maybe you can remove the directors cut overlay in instant replay?

Easy, just tell me which file is responsible for that. Currently I have no time to explore all that stuff.
If no, then I will check that someday later

what is the directors cut overlay in instant replay?

I would like if you remove all the logos in cut scenes...the file is gooeyoverlaystatic.iff