Mon Sep 19, 2022 1:15 am
1. Open the game first, then open the modifier.
2. Understand the instructions for using the modifier.
3. Open each main initial item of the modifier and then use each sub-modification item [without the main initial item, do not need to open] [main initial item: if open...modify].
4. Use the modification item [cannot open to view the modification instructions].
5. In the key function, the number keys are generally above the letter keys.
Modifier Instructions:
1. Single use.
2. Open Legendary Manager Modification:
Unallocated funds can be modified by selecting "Business" in the navigation interface and selecting "Team Assets".
The experience/score is modified after gaining experience, and the experience modification updates the level the next time you gain experience.
To modify skill points, go to the navigation interface and select "Legendary Manager", then select "My Skills" to modify.
Trust/Mood Modification Select "Legendary Manager" in the navigation interface, and select "My Relationships" modification.
3. Enable Legendary Manager player attribute modification: After enabling, select "Administrative Office" in the navigation interface, select "Lineup List", click on the player, and click to view the player card modification [attribute range 1-222].
Key function introduction:
Y+F1 to open the game modification
U+5 The game is over
U+6 game time increases by 1 minute
U+7 Twenty-four second violation by the ball carrier
U+8 Eight-second violation of the ball carrier's failure to change the court
U+9 Five-Second Serve Violation
U+0 Unlimited Stamina
Y+F2 to open the legendary manager modification
U+F5 Unallocated Funds+10000
U+F6 Maximum unallocated funds
U+F7 EXP +5000
U+F8 Max Experience
U+F9 Score +100
U+F10 Max Score
U+F11 Skill Point +1
I+F5 Max skill point
I+F6 skill point reset
I+F7 Maximum Trust
I+F8 Maximum Mood
I+F9 Unlimited Storage/Action Points
U+- slow motion
U+= super speed
Y+F4 Open player attribute modification
Y+F3 all attributes max
Player full attribute customization modification
Mon Sep 19, 2022 1:17 am
MordredSJT wrote:Ok...so...I figured out the easiest way (for me at least) to edit all the ratings in the character builder with no limits using the table Skidrow_Admin posted above. The addresses as they are listed have a value that it basically representing the in game values for a block of four attributes. You can mess around with the value in the table if you want, but I just went to browse memory region for one of the entries. That allowed me to just edit the individual values in the memory viewer from 7FF69349C650 to 7FF69349C665. Just input the hex value for the rating you want on that attribute. The game doesn't register above 110 I believe, so I used 6E for all the values. That got me a player with all 110 attribute ratings. This will put your overall above 99 though, but using the table to lock your overall at 99 should allow you to continue and complete making the player.
edit - unfortunately not letting me use the OP build, it kicks me out with an error code when I try to start a mycareer with it...still experimenting to see what I can get away with
edit 2 - bumping stats up to the maximum allowable for your build in every category works fine, so you can't go crazy, but you can get the max potential for your position, height, weight, wingpsan, etc... more badge points to play with...it's too bad because I really just wanted to be able to unlock certain animations to use on my 6'9" point guard that I can't use because his speed with ball is too low, plus the jumpers I won't be able to use because my shooting stats are middling.
Mon Sep 19, 2022 1:24 am
MordredSJT wrote:Well guys, I'm not sure what you are doing that is causing problems.
I'll start with the fact that the table is specifically for the build creator, and nothing else. You can't change anything about already created players using it, those are completely different values at different addresses.
So, you need to open the table, select nba2k23 as the process, then go to create a build. Select all your particulars for the build you want, and get to the screen where you are choosing max levels for all your attributes. At this point you should notice the first three addresses in the table are populated with something akin to a value of 421075225 like mine was. If you look at the descriptions for each address on the table, you'll notice that it is a few chinese characters and a series of numbers. If you were to copy those numbers from the description and paste them in as a new value, then check your game...you'll notice that you have a bunch of skills at 99 now. Specifically, the first address is for finishing, the second for shooting, and the third for playmaking. However, there are actually some attributes that are skipped along the way here...plus, if you put your numbers above the allowable cap for your build, you won't be able to actually use it in a mycareer. It will finish the build, and you can test it, but launching mycareer with it will kick you out to main menu with an error. So, what I did was go through all my attributes and write down the max allowed values (what you could get to if you were putting points into them in game legitimately). Then, if you right click on one of the addresses in the table and choose browse memory location, you will open the memory viewer for cheatengine. It should be showing you the memory locations I mentioned in my earlier post in the top line. If you have all your attributes back at the lowest levels, they should be populated across the board with 19. That's because 19 in hexidecimal is 25 in decimal...and 25 is the min value you'll see in the game for each attribute. So, now you just input the hexidecimal value for the maximum allowable value of the corresponding attribute at each memory address. If you don't know hexidecimal well, and don't want to bother converting in your head...google will provide a handy dandy decimal to hexidecimal conversion tool with a simple search. I already mentioned that 19 will give you 25, similarly 63 will give you 99. Now, after you do that and go back into the game, you should see all your attributes at their max allowable levels. Your overall is likely going to be just a shade over 100 though, and the game does not like this. So, go back to the table...the last address there is your overall value. You set that to 99 and check the box to hold the value there. Go back in game, your overall should say 99, and you should be able to press a button to continue on through the builder. Choose your takeovers, finish your build, start your mycareer. Boom.
If you guys run into specific problems along the way, I'll be happy to try and help some more.
Mon Sep 19, 2022 1:31 am
Skidrow_Admin wrote:
- Code:
1. Open the game first, then open the modifier.
2. Understand the instructions for using the modifier.
3. Open each main initial item of the modifier and then use each sub-modification item [without the main initial item, do not need to open] [main initial item: if open...modify].
4. Use the modification item [cannot open to view the modification instructions].
5. In the key function, the number keys are generally above the letter keys.
- Code:
Modifier Instructions:
1. Single use.
2. Open Legendary Manager Modification:
Unallocated funds can be modified by selecting "Business" in the navigation interface and selecting "Team Assets".
The experience/score is modified after gaining experience, and the experience modification updates the level the next time you gain experience.
To modify skill points, go to the navigation interface and select "Legendary Manager", then select "My Skills" to modify.
Trust/Mood Modification Select "Legendary Manager" in the navigation interface, and select "My Relationships" modification.
3. Enable Legendary Manager player attribute modification: After enabling, select "Administrative Office" in the navigation interface, select "Lineup List", click on the player, and click to view the player card modification [attribute range 1-222].Key function introduction:
Y+F1 to open the game modification
U+5 The game is over
U+6 game time increases by 1 minute
U+7 Twenty-four second violation by the ball carrier
U+8 Eight-second violation of the ball carrier's failure to change the court
U+9 Five-Second Serve Violation
U+0 Unlimited Stamina
Y+F2 to open the legendary manager modification
U+F5 Unallocated Funds+10000
U+F6 Maximum unallocated funds
U+F7 EXP +5000
U+F8 Max Experience
U+F9 Score +100
U+F10 Max Score
U+F11 Skill Point +1
I+F5 Max skill point
I+F6 skill point reset
I+F7 Maximum Trust
I+F8 Maximum Mood
I+F9 Unlimited Storage/Action Points
U+- slow motion
U+= super speed
Y+F4 Open player attribute modification
Y+F3 all attributes max
Player full attribute customization modification
Download Link to Software: https://www.mediafire.com/file/wb5ri58vn29igfg/NBA.2K23.v1.0.Plus.58.Trainer.rar/file
Untranslated Image:[ Image ]
Translated Images of Software:https://imgur.com/a/MNtSeLV
Mon Sep 19, 2022 3:09 am
k00ya wrote:Skidrow_Admin wrote:
- Code:
1. Open the game first, then open the modifier.
2. Understand the instructions for using the modifier.
3. Open each main initial item of the modifier and then use each sub-modification item [without the main initial item, do not need to open] [main initial item: if open...modify].
4. Use the modification item [cannot open to view the modification instructions].
5. In the key function, the number keys are generally above the letter keys.
- Code:
Modifier Instructions:
1. Single use.
2. Open Legendary Manager Modification:
Unallocated funds can be modified by selecting "Business" in the navigation interface and selecting "Team Assets".
The experience/score is modified after gaining experience, and the experience modification updates the level the next time you gain experience.
To modify skill points, go to the navigation interface and select "Legendary Manager", then select "My Skills" to modify.
Trust/Mood Modification Select "Legendary Manager" in the navigation interface, and select "My Relationships" modification.
3. Enable Legendary Manager player attribute modification: After enabling, select "Administrative Office" in the navigation interface, select "Lineup List", click on the player, and click to view the player card modification [attribute range 1-222].Key function introduction:
Y+F1 to open the game modification
U+5 The game is over
U+6 game time increases by 1 minute
U+7 Twenty-four second violation by the ball carrier
U+8 Eight-second violation of the ball carrier's failure to change the court
U+9 Five-Second Serve Violation
U+0 Unlimited Stamina
Y+F2 to open the legendary manager modification
U+F5 Unallocated Funds+10000
U+F6 Maximum unallocated funds
U+F7 EXP +5000
U+F8 Max Experience
U+F9 Score +100
U+F10 Max Score
U+F11 Skill Point +1
I+F5 Max skill point
I+F6 skill point reset
I+F7 Maximum Trust
I+F8 Maximum Mood
I+F9 Unlimited Storage/Action Points
U+- slow motion
U+= super speed
Y+F4 Open player attribute modification
Y+F3 all attributes max
Player full attribute customization modification
Download Link to Software: https://www.mediafire.com/file/wb5ri58vn29igfg/NBA.2K23.v1.0.Plus.58.Trainer.rar/file
Untranslated Image:[ Image ]
Translated Images of Software:https://imgur.com/a/MNtSeLV
so this modifier is specifically for myGM correct? do you reckon i could use this modifier to grind for vc faster or no?
Mon Sep 19, 2022 4:17 am
Mon Sep 19, 2022 7:28 am
Mon Sep 19, 2022 8:19 am
Skidrow_Admin wrote:so someone in china posted a editor but its entirely in chinese and i am trying to change the language and i do believe it has player attributes and offline:[ Image ]
Mon Sep 19, 2022 3:22 pm
MordredSJT wrote:Well guys, I'm not sure what you are doing that is causing problems.
I'll start with the fact that the table is specifically for the build creator, and nothing else. You can't change anything about already created players using it, those are completely different values at different addresses.
So, you need to open the table, select nba2k23 as the process, then go to create a build. Select all your particulars for the build you want, and get to the screen where you are choosing max levels for all your attributes. At this point you should notice the first three addresses in the table are populated with something akin to a value of 421075225 like mine was. If you look at the descriptions for each address on the table, you'll notice that it is a few chinese characters and a series of numbers. If you were to copy those numbers from the description and paste them in as a new value, then check your game...you'll notice that you have a bunch of skills at 99 now. Specifically, the first address is for finishing, the second for shooting, and the third for playmaking. However, there are actually some attributes that are skipped along the way here...plus, if you put your numbers above the allowable cap for your build, you won't be able to actually use it in a mycareer. It will finish the build, and you can test it, but launching mycareer with it will kick you out to main menu with an error. So, what I did was go through all my attributes and write down the max allowed values (what you could get to if you were putting points into them in game legitimately). Then, if you right click on one of the addresses in the table and choose browse memory location, you will open the memory viewer for cheatengine. It should be showing you the memory locations I mentioned in my earlier post in the top line. If you have all your attributes back at the lowest levels, they should be populated across the board with 19. That's because 19 in hexidecimal is 25 in decimal...and 25 is the min value you'll see in the game for each attribute. So, now you just input the hexidecimal value for the maximum allowable value of the corresponding attribute at each memory address. If you don't know hexidecimal well, and don't want to bother converting in your head...google will provide a handy dandy decimal to hexidecimal conversion tool with a simple search. I already mentioned that 19 will give you 25, similarly 63 will give you 99. Now, after you do that and go back into the game, you should see all your attributes at their max allowable levels. Your overall is likely going to be just a shade over 100 though, and the game does not like this. So, go back to the table...the last address there is your overall value. You set that to 99 and check the box to hold the value there. Go back in game, your overall should say 99, and you should be able to press a button to continue on through the builder. Choose your takeovers, finish your build, start your mycareer. Boom.
If you guys run into specific problems along the way, I'll be happy to try and help some more.
Mon Sep 19, 2022 6:08 pm
Skidrow_Admin wrote:k00ya wrote:Skidrow_Admin wrote:
- Code:
1. Open the game first, then open the modifier.
2. Understand the instructions for using the modifier.
3. Open each main initial item of the modifier and then use each sub-modification item [without the main initial item, do not need to open] [main initial item: if open...modify].
4. Use the modification item [cannot open to view the modification instructions].
5. In the key function, the number keys are generally above the letter keys.
- Code:
Modifier Instructions:
1. Single use.
2. Open Legendary Manager Modification:
Unallocated funds can be modified by selecting "Business" in the navigation interface and selecting "Team Assets".
The experience/score is modified after gaining experience, and the experience modification updates the level the next time you gain experience.
To modify skill points, go to the navigation interface and select "Legendary Manager", then select "My Skills" to modify.
Trust/Mood Modification Select "Legendary Manager" in the navigation interface, and select "My Relationships" modification.
3. Enable Legendary Manager player attribute modification: After enabling, select "Administrative Office" in the navigation interface, select "Lineup List", click on the player, and click to view the player card modification [attribute range 1-222].Key function introduction:
Y+F1 to open the game modification
U+5 The game is over
U+6 game time increases by 1 minute
U+7 Twenty-four second violation by the ball carrier
U+8 Eight-second violation of the ball carrier's failure to change the court
U+9 Five-Second Serve Violation
U+0 Unlimited Stamina
Y+F2 to open the legendary manager modification
U+F5 Unallocated Funds+10000
U+F6 Maximum unallocated funds
U+F7 EXP +5000
U+F8 Max Experience
U+F9 Score +100
U+F10 Max Score
U+F11 Skill Point +1
I+F5 Max skill point
I+F6 skill point reset
I+F7 Maximum Trust
I+F8 Maximum Mood
I+F9 Unlimited Storage/Action Points
U+- slow motion
U+= super speed
Y+F4 Open player attribute modification
Y+F3 all attributes max
Player full attribute customization modification
Download Link to Software: https://www.mediafire.com/file/wb5ri58vn29igfg/NBA.2K23.v1.0.Plus.58.Trainer.rar/file
Untranslated Image:[ Image ]
Translated Images of Software:https://imgur.com/a/MNtSeLV
so this modifier is specifically for myGM correct? do you reckon i could use this modifier to grind for vc faster or no?
NO if you open up the translated images: It will explain that you can use this in GM mode and MY Career mode as it allows you to max player attributes: "Y+F3 all attributes max
Player full attribute customization modification"
Mon Sep 19, 2022 10:59 pm
Skidrow_Admin wrote:k00ya wrote:Skidrow_Admin wrote:
- Code:
1. Open the game first, then open the modifier.
2. Understand the instructions for using the modifier.
3. Open each main initial item of the modifier and then use each sub-modification item [without the main initial item, do not need to open] [main initial item: if open...modify].
4. Use the modification item [cannot open to view the modification instructions].
5. In the key function, the number keys are generally above the letter keys.
- Code:
Modifier Instructions:
1. Single use.
2. Open Legendary Manager Modification:
Unallocated funds can be modified by selecting "Business" in the navigation interface and selecting "Team Assets".
The experience/score is modified after gaining experience, and the experience modification updates the level the next time you gain experience.
To modify skill points, go to the navigation interface and select "Legendary Manager", then select "My Skills" to modify.
Trust/Mood Modification Select "Legendary Manager" in the navigation interface, and select "My Relationships" modification.
3. Enable Legendary Manager player attribute modification: After enabling, select "Administrative Office" in the navigation interface, select "Lineup List", click on the player, and click to view the player card modification [attribute range 1-222].Key function introduction:
Y+F1 to open the game modification
U+5 The game is over
U+6 game time increases by 1 minute
U+7 Twenty-four second violation by the ball carrier
U+8 Eight-second violation of the ball carrier's failure to change the court
U+9 Five-Second Serve Violation
U+0 Unlimited Stamina
Y+F2 to open the legendary manager modification
U+F5 Unallocated Funds+10000
U+F6 Maximum unallocated funds
U+F7 EXP +5000
U+F8 Max Experience
U+F9 Score +100
U+F10 Max Score
U+F11 Skill Point +1
I+F5 Max skill point
I+F6 skill point reset
I+F7 Maximum Trust
I+F8 Maximum Mood
I+F9 Unlimited Storage/Action Points
U+- slow motion
U+= super speed
Y+F4 Open player attribute modification
Y+F3 all attributes max
Player full attribute customization modification
Download Link to Software: https://www.mediafire.com/file/wb5ri58vn29igfg/NBA.2K23.v1.0.Plus.58.Trainer.rar/file
Untranslated Image:[ Image ]
Translated Images of Software:https://imgur.com/a/MNtSeLV
so this modifier is specifically for myGM correct? do you reckon i could use this modifier to grind for vc faster or no?
NO if you open up the translated images: It will explain that you can use this in GM mode and MY Career mode as it allows you to max player attributes: "Y+F3 all attributes max
Player full attribute customization modification"
Tue Sep 20, 2022 3:17 am
Tue Sep 20, 2022 4:14 am
4MR wrote:Please who can download the new version https://bbs.3dmgame.com/thread-6334059-1-1.html
Tue Sep 20, 2022 8:07 am
k00ya wrote:4MR wrote:Please who can download the new version https://bbs.3dmgame.com/thread-6334059-1-1.html
skidrow might be able to download it. at the moment i dont think any of us can download it unless we use a chinese phone number to verify our account but none of us have that lol
Tue Sep 20, 2022 9:50 am
Tue Sep 20, 2022 10:56 am
McMarcel wrote:k00ya wrote:4MR wrote:Please who can download the new version https://bbs.3dmgame.com/thread-6334059-1-1.html
skidrow might be able to download it. at the moment i dont think any of us can download it unless we use a chinese phone number to verify our account but none of us have that lol
This was said at the download site:
9.20 update
The update of the modifier for the game update is completed.
This update is a mandatory update, please delete the original file and then download and install it again.
Here is the file:
https://gofile.io/d/kOw4cE
Tue Sep 20, 2022 12:03 pm
Kyu2KMods wrote:McMarcel wrote:k00ya wrote:4MR wrote:Please who can download the new version https://bbs.3dmgame.com/thread-6334059-1-1.html
skidrow might be able to download it. at the moment i dont think any of us can download it unless we use a chinese phone number to verify our account but none of us have that lol
This was said at the download site:
9.20 update
The update of the modifier for the game update is completed.
This update is a mandatory update, please delete the original file and then download and install it again.
Here is the file:
https://gofile.io/d/kOw4cE
I tried this and not working on the new patch. Any news?> How to properly install it . Any help
Tue Sep 20, 2022 3:56 pm
McMarcel wrote:k00ya wrote:4MR wrote:Please who can download the new version https://bbs.3dmgame.com/thread-6334059-1-1.html
skidrow might be able to download it. at the moment i dont think any of us can download it unless we use a chinese phone number to verify our account but none of us have that lol
This was said at the download site:
9.20 update
The update of the modifier for the game update is completed.
This update is a mandatory update, please delete the original file and then download and install it again.
Here is the file:
https://gofile.io/d/kOw4cE
Tue Sep 20, 2022 9:10 pm
Tue Sep 20, 2022 10:33 pm
Kukuang98 wrote:um...
Have Fun!
Thnx McMarcel and KappaLambda!
Wed Sep 21, 2022 12:58 am
McMarcel wrote:Kyu2KMods wrote:McMarcel wrote:k00ya wrote:4MR wrote:Please who can download the new version https://bbs.3dmgame.com/thread-6334059-1-1.html
skidrow might be able to download it. at the moment i dont think any of us can download it unless we use a chinese phone number to verify our account but none of us have that lol
This was said at the download site:
9.20 update
The update of the modifier for the game update is completed.
This update is a mandatory update, please delete the original file and then download and install it again.
Here is the file:
https://gofile.io/d/kOw4cE
I tried this and not working on the new patch. Any news?> How to properly install it . Any help
Last update of the zip is from 9 hours ago, so its up to date. I don't use it myself, so I can't really help. I put the instructions that are also available for download in the attachments.
Wed Sep 21, 2022 1:26 am
Wed Sep 21, 2022 2:48 am
Kukuang98 wrote:um...
Have Fun!
Thnx McMarcel and KappaLambda!
Wed Sep 21, 2022 5:00 am
MordredSJT wrote:Well guys, I'm not sure what you are doing that is causing problems.
I'll start with the fact that the table is specifically for the build creator, and nothing else. You can't change anything about already created players using it, those are completely different values at different addresses.
So, you need to open the table, select nba2k23 as the process, then go to create a build. Select all your particulars for the build you want, and get to the screen where you are choosing max levels for all your attributes. At this point you should notice the first three addresses in the table are populated with something akin to a value of 421075225 like mine was. If you look at the descriptions for each address on the table, you'll notice that it is a few chinese characters and a series of numbers. If you were to copy those numbers from the description and paste them in as a new value, then check your game...you'll notice that you have a bunch of skills at 99 now. Specifically, the first address is for finishing, the second for shooting, and the third for playmaking. However, there are actually some attributes that are skipped along the way here...plus, if you put your numbers above the allowable cap for your build, you won't be able to actually use it in a mycareer. It will finish the build, and you can test it, but launching mycareer with it will kick you out to main menu with an error. So, what I did was go through all my attributes and write down the max allowed values (what you could get to if you were putting points into them in game legitimately). Then, if you right click on one of the addresses in the table and choose browse memory location, you will open the memory viewer for cheatengine. It should be showing you the memory locations I mentioned in my earlier post in the top line. If you have all your attributes back at the lowest levels, they should be populated across the board with 19. That's because 19 in hexidecimal is 25 in decimal...and 25 is the min value you'll see in the game for each attribute. So, now you just input the hexidecimal value for the maximum allowable value of the corresponding attribute at each memory address. If you don't know hexidecimal well, and don't want to bother converting in your head...google will provide a handy dandy decimal to hexidecimal conversion tool with a simple search. I already mentioned that 19 will give you 25, similarly 63 will give you 99. Now, after you do that and go back into the game, you should see all your attributes at their max allowable levels. Your overall is likely going to be just a shade over 100 though, and the game does not like this. So, go back to the table...the last address there is your overall value. You set that to 99 and check the box to hold the value there. Go back in game, your overall should say 99, and you should be able to press a button to continue on through the builder. Choose your takeovers, finish your build, start your mycareer. Boom.
If you guys run into specific problems along the way, I'll be happy to try and help some more.
Wed Sep 21, 2022 6:56 am
prestige99 wrote:Kukuang98 wrote:um...
Have Fun!
Thnx McMarcel and KappaLambda!
when i open the CT made show a error
[ Image ]